"CE" mark is a kind of safety certification mark, which is regarded as the passport opened by the manufacturer and entering the European market. CE represents the European Union - (CONFORMITE EUROPEENNE), which is a European compulsory certification. CE mark is the "pass" for products to enter the markets of EU countries and EU free trade association countries. Any regulation (involved in the new method directive) Products, whether produced outside the EU or in EU Member States, must meet the requirements of directives and relevant coordination standards and be affixed with CE mark before being put on the EU market in order to circulate freely in the EU market.
For example, the safety requirements of many terminal products (such as batteries) should be considered in order to better meet the safety requirements of the terminal products. The CE certification of battery products by the EU designated agency can maximize the trust of consumers and market supervision institutions, and effectively prevent the occurrence of irresponsible allegations. In the case of litigation, the CE certification certificate of the EU designated institution will become technical evidence with legal effect.
Battery products
CE standard
Secondary battery
EN 62133
Primary battery Primary battery
EN 60086-1, 2, 3, 4, 5
Lithium and secondary batteries
EN 61960
Secondary nickel cadmium and nickel hydrogen batteries
IEC/EN 61951-1, 2
lithium battery
EN/IEC 62281
Secondary NIMH button battery
EN 61808
Portable secondary battery
EN 61809
Secondary Ni MH battery
EN 61436
Secondary nickel cadmium battery
EN 60285
Secondary small nickel pick cell
EN 61440
Secondary nickel pick button battery
EN61150
Secondary square sealed nickel pick battery
EN 60622
Secondary square exhaust nickel cadmium battery
EN 60623
International identification of secondary battery
EN 61429
Portable secondary battery
EN 61959
nergy storage battery system
EN 61000-3-1/2/3/4
Power battery system
EN 50604. ISO 12405
Power battery cell (lithium series)
EN/IEC 62660
Energy storage battery cell / system (lithium series)
EN/IEC 62619 EN/IEC 62620(performance requirements for industrial use)
Battery system (lithium series)
EN/IEC 60730 Annex H(BMS functional safety assessment)
Lead acid battery
EN 60982
Lead acid battery for starting
EN 60095-1, 2, 4
Portable valve regulated lead-acid battery
EN 61056-1.2
Stationary exhaust (valve regulated) lead-acid battery
EN 60896-11. 2, 21
Secondary battery for electric road vehicle
EN 61982
Lead acid traction battery
EN 60254
lithium battery
IEC 62281
Fixed lead-acid battery (UK)
BS 6290
step 1
Application
1. Fill in the application form
2. Application company information form
3. Provide product information EMC: (circuit diagram + instruction manual) LVD: circuit diagram + manual + b.o.m + label (nameplate) + shell size diagram + PCB board diagram + component certificate + motor (depending on the product) + transformer specification, etc. (depending on the product)
4. The number of product samples depends on the specific situation
Step 2
Quotation
Determine the test standard, test time and corresponding expenses according to the data provided
Step 3
Pay
After confirming the quotation, the applicant shall sign the filing application form and service agreement and pay part or all of the project fee
Step 4
Testing
The laboratory carries out a full set of tests and difference tests of relevant models on the applied products according to relevant EU testing standards
Step 5
Report
The test passed and the report was completed
Step 6
Crtification
CE certificate will be issued after the project is completed. The manufacturer shall keep the CE product type test report.
1. Name and address of the manufacturer (EU authorized representative (EU authorized agent) AR), product name, model, etc;
Product instructions
3.Safety design documents (including key structural drawings, i.e. design drawings that can reflect the climbing distance, gap, number and thickness of insulation layers);
4.Product technical conditions (or enterprise standards) and establishment of technical data;
5.Electrical schematic diagram, block diagram and circuit diagram of the product;
6.List of key components or raw materials (please select products with European certification mark);
7.Test report;
8.Relevant certificates issued by EU authorized certification authority NB;
9.Registration certificate of products in EU (if any)；
10.CE declaration of conformity (DOC)。
